Additional information
| Code: | RX328 |
|---|---|
| Size range: | 6/XS – 10/XL |
| Coating: | Polyurethane |
| Gauge: | 15 |
| Liner: | HPPE with Carbon |
| Packaging: | 10 pairs/pack – 100 pairs/carton |
RAYZA RX328
ESD Polyurethane Coated Cut Level B Glove
- High quality Japanese HPPE liner
- Highly durable polyurethane coating
- Suitable for dry conditions involving electronic components
Description
EN388:2016-Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture.
4 = Abrasion
3 = Blade Cut* (coup)
4 = Tear
2 = Puncture
B = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
EN16350:2014 – Electrostatic properties
This standard prescribes the following test conditions and minimum requirements for the electrostatic properties of protective gloves:
- The contact resistance of a glove must be less than 100 megaohms (Rv < 1.0 x 108 Ω)
- DIN EN 1149-2:1997 regulates contact resistance
- The atmosphere during testing for contact resistance must constitute an ambient temperature of 23°C (± 1°C) and have relative humidity of 25% (± 5%)
- Five tests will be conducted and each measurement must be within the threshold value