Additional information
| Code: | MX298 |
|---|---|
| Size range: | 8/M – 11/XXL |
| Leather: | Top Grade Cow Grain Leather |
| Stitching: | Kevlar |
| Liner: | Kevlar |
| Packaging: | 10 pairs/pack – 60 pairs/carton |
EN388:2016-Mechanical Hazards
MAGMA MX298
MAGMA Hide Leather Cut Level E Welder’s Gauntlet
Characteristics
- Top grade cow grain leather
- Wide fit for ease of donning
- Heat resistant Kevlar stitching
- Superbly soft and supple leather
- Pigment free to retain flexibility
- Increased length for extra protection
- Cut resistant kevlar lining around the palm of the glove to protect the wearers from cut risks
Description
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
2 = Abrasion (Performance Index 1-4)
X = Blade Cut* (Performance Index 1-5)
3 = Tear (Performance Index 1-4)
2 = Puncture (Performance Index 1-4)
E = Cut (EN ISO 13997) (Rating A-F)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
EN407:2020 Thermal risks (heat and/or fire)
This standard specifies thermal performance for protective gloves against heat and/or fire. The table below indicates the glove’s resistance to:
4= Flammability (Performance Index 1-4)
1 = Contact heat (Performance Index 1-4)
3 = Convective heat (Performance Index 1-4)
X = Radiant heat (Performance Index 1-4)
4 = Small splashes of molten metal (Performance Index 1-4)
X = Large splashes of molten metal (Performance Index 1-4)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
EN12477
Manual Metal Welding Hazards
Rating: Type A