Additional information
| Code: | MX295 |
|---|---|
| Size range: | 8/M – 11/XXL |
| Leather: | Top Grade Sheep Hide |
| Stitching: | Kevlar |
| Liner: | Spectra |
| Packaging: | 10 pairs/pack – 60 pairs/carton |
MAGMA MX295
Hide Leather Cut Index D Welder’s Glove
- Top grade sheep grain leather
- Wide fit for ease of donning
- Increased length for extra protection
- Thumb and crotch reinforcement
- Superbly soft and supple leather
- Cut resistant lining around the palm of the glove to protect the wearers from cut risks
- Heat resistant Kevlar stitching
Description
EN388:2016-Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
2 = Abrasion
X = Blade Cut* (coup)
4 = Tear
3 = Puncture
D = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
EN407:2020 Thermal risks (heat and/or fire)
This standard specifies thermal performance for protective gloves against heat and/or fire. The table below indicates the glove’s resistance to:
4= Flammability
1 = Contact heat
3 = Convective heat
X = Radiant heat
4 = Small splashes of molten metal
X = Large splashes of molten metal
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
EN12477
Manual Metal Welding Hazards
Rating: Type A