- High quality Japanese HPPE.
- Non-slip top to prevent slippage.
- Seamless, breathable material with anti-bacterial and moisture-wicking properties.
- Maximum cut resistance.
- High filament count for enhanced dexterity and softer feel.
- Continuous filament ensures low lint.
- Washable .
Rayza RX518
Description
The Stalsen 18” sleeve provides maximum cut protection for arms without compromise on comfort.
The RAYZA RX518 incorporates an elastic grip-top to eliminate slippage and a thumb hole to maintain position around the palm of the hand. By combining the best Japanese HPPE with glass fibre, both of which have a high strength-to-weight ratio as well as nylon, outstanding cut resistance is achieved without increasing the bulk or weight.
The specially sourced glass fibre is made from a higher strength fibre than normal, producing enhanced abrasion resistance and an increase of 40% in tensile strength. Not only cut resistant, the highly breathable material incorporates anti-bacterial and moisture-wicking properties that ensure the wearer is protected in comfort all day, every day.
Specification
Brand | Rayza |
---|---|
Available Sizes | 18" |
Glove Width | 120mm |
Glove Length | 450mm (18") |
Liner | Seamless Japanese 15 Gauge High Performance Polyethylene (HPPE) with Glass Fibre, Nylon and Spandex |
354X
EN388:2003-Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture.
3 = Abrasion (Performance Index 1-4)
5 = Blade Cut* (Performance Index 1-5)
4 = Tear (Performance Index 1-4)
X = Puncture (Performance Index 1-4)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades.
More information
To request a sample of our products please click below. For more information about our products, or for details of how and where you can order, please contact Stalsen on: +44 (0) 203 5000 723 or complete our contact form