RAYZA RX567
Double Dipped Nitrile, Cut Index E, Thermal Glove
Why we developed this glove
There was a clear requirement for a thermal glove that combined full waterproofing, but that wasn’t restrictive for the wearer.
We identified a common issue… [Read more]
Patrick Tydeman – Director
GLOVE FEATURES
- Lightweight liner provides high levels of comfort and dexterity
- A fully coated nitrile barrier ensures high performance against liquid penetration across the glove
- A textured nitrile coating for enhanced grip and a degree of oil resistance
- Thermal fleece lining
GLOVE SPECIFICATION
| Code: | RX567 |
| Size range: | 7/S – 12/3XL |
| Coating: | Nitrile |
| Gauge: | 18 |
| Liner: | HPPE with fleece liner |
| Packaging: | 10 pairs/pack – 100 pairs/carton |
| RRP: | £16.35 |
GLOVE STANDARDS
EN388:2016+A1:2018 - Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
4 = Abrasion
X = Blade Cut* (coup)
4 = Tear
2 = Puncture
E = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
EN511:2006 - Resistance to the cold
Specifies a glove’s performance in protection against the cold. This cold can be linked to weather conditions or to industrial activity.
X = Convective Cold (Performance Index 0-4)
1 = Contact cold (Performance Index 0-4)
X = Water penetration (1 = Pass/0 = Fail)
Notes: Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
Declaration of Conformity
GLOVE STORY
Who this glove was designed for
For people working in cold and wet conditions, who require good levels of dexterity and flexibility.
Why we developed this glove
There was a clear requirement for a thermal glove that combined full waterproofing, but that wasn’t restrictive for the wearer.
We identified a common issue arising on many of our customers’ sites, that waterproof thermal gloves did not have the flexibility needed by the wearer, owing to the bulky fleece liner and materials used.
Consequently, these waterproof thermal gloves were often removed and replaced with standard winter glove that offer no protection against mechanical hazards.
The solution
The solution was the development of the RX567, using innovations in materials and design, we developed a lighter weight waterproof thermal glove with a secure warm fleece and thin cut resistant liner.
The RX567 is further enhanced by its blue barrier ensuring water repellence across the whole hand with a further textured nitrile coating for enhanced grip.
Glove feedback
“Great glove, very effective in keeping hands safe and warm without the additional bulky fleece, the surveyors can even draw points on a Leica and Trimble.”
H&S Manager
Winter glove range
TALK TO US ABOUT HAND PROTECTION
Want to talk to the Stalsen team about your hand protection requirements?Call: +44 (0)1394 447090. Email: info@stalsen.com.Or complete the contact form below.
Proven Results
Read the STALSEN Case Studies for more information about how we work with our clients.
