RAYZA RX565
Double Dipped Nitrile, Cut Index E Glove
Why we developed this glove
Working closely with our customer in Europe, they expressed a need for a single glove that covered all three requirements, high cut resistance, good grip, suitable for wet and oily conditions. Their solution had been to use a glove designed for dry work and place a disposable nitrile underneath for waterproofing… [Read more]
Louise – Marketing
GLOVE FEATURES
- Ultra-lightweight liner provides high levels of comfort and dexterity
- Extended cuff for enhanced protection in the wrist area
- A fully coated nitrile barrier ensures high performance against liquid penetration across the glove
- A textured nitrile coating for enhanced grip and a degree of oil resistance
GLOVE SPECIFICATION
| Code: | RX565 |
| Size range: | 6/XS – 11/2XL |
| Coating: | Textured nitrile |
| Gauge | 18 |
| Liner: | High Performance Polyethylene (HPPE) |
| Packaging: | 10 pairs/pack – 100 pairs/carton |
| RRP: | £12.80 |
GLOVE STANDARDS
EN388:2016+A1:2018 - Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
4 = Abrasion
X = Blade Cut* (coup)
4 = Tear
2 = Puncture
E = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
GLOVE STORY
Who this glove was designed for
Operatives who require a high level of cut resistance and grip in wet and oily conditions
Why we developed this glove
Working closely with our customer in Europe, they expressed a need for a single glove that covered all three requirements, high cut resistance, good grip, suitable for wet and oily conditions.
Their solution had been to use a glove designed for dry work and place a disposable nitrile underneath for waterproofing. This was an insufficient solution because when a ‘dry work’ cut resistant glove is in contact with oil, the performance of the cut resistant yarns is significantly reduced and the overall level of cut resistance drop by 2 or more levels.
The solution
The RX565 was developed with three layers of protection, a lining for cut protection, a ‘nitrile barrier’ for waterproofing and a of ‘sandy nitrile’ coating for grip and oil resistance.
“Since its initial development for the automotive industry in France, The Rayza RX565 has actually become one of our best selling products across multiple industries and countries.”
Kieran Tydeman – STALSEN MD
Glove feedback
“The glove has improved efficiencies. We don’t have to keep changing our gloves as we move between tasks throughout the day, it keeps us comfortable and protected. It has been a huge asset in our working practises..”
Project Manager (Highways)
TALK TO US ABOUT HAND PROTECTION
Want to talk to the Stalsen team about your hand protection requirements?Call: +44 (0)1394 447090. Email: info@stalsen.com.Or complete the contact form below.
Proven Results
Read the STALSEN Case Studies for more information about how we work with our clients.
