RAYZA RX562
Ultra-Lightweight, Polyurethane Coated, Cut Index F Glove
Why we developed this glove
We had identified a need for a better suited glove for precise activities, such as terminating end cables. We found that operatives were using cut resistant gloves (index D and above) but that these gloves did not offer the right levels of dexterity to perform the tasks… [Read more]
Patrick – Director
GLOVE FEATURES
- New generation cut-resistant liner with maximum cut protection
- Ultra-lightweight liner provides exceptional dexterity, touch sensitivity, and comfort
- Highly durable polyurethane coating suitable for dry or slightly oily conditions
- Touchscreen compatibility
GLOVE SPECIFICATION
| Code: | RX562 |
| Size range: | 6/XS – 11/2XL |
| Coating: | Polyurethane |
| Gauge: | 21 |
| Liner: | High Performance Polyethylene (HPPE) |
| Packaging: | 10 pairs/pack – 50 pairs/carton |
| RRP: | £14.35 |
GLOVE STANDARDS
EN388:2016+A1:2018 - Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
4 = Abrasion
X = Blade Cut* (coup)
4 = Tear
2 = Puncture
F = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
GLOVE STORY
Who this glove was designed for
Operatives who need to perform precision tasks whilst still maintaining the highest level of mechanical cut resistance.
Why we developed this glove
We had identified a need for a better suited glove for precise activities, such as terminating end cables. We found that operatives were using cut resistant gloves (index D and above) but that these gloves did not offer the right levels of dexterity to perform the tasks. To overcome this, they were typically doing one of the following three things:
a) Cutting the fingertips off their existing gloves, or
b) Using gloves that already had the fingertips removed, or
c) Removing their gloves completely
The solution
All three options above left fingertips or whole hands exposed to injury. Unsurprisingly, it is reported that 70% of hand injuries occur when gloves are not on hands, and that more frequent injuries occurred when fingertips are left exposed.
The Rayza RX562 glove was a ‘first to market’ in the UK owing to its combination of an extremely lightweight liner (21 gauge) and highest mechanical cut resistance (index F). It’s revolutionary introduction means operatives no longer have exposed fingertips or hands and will instead have a glove that focuses on achieving comfort, functionality, and protection without compromise.
Glove feedback
“Better in most ways. I always had to remove the old gloves to do some tasks. Or use fingerless gloves which I find a bit pointless as your fingers are exposed to dangers. I never had to remove the new gloves at any point, even for using a touch screen phone.”
Electrical Engineer (Mechanical & Electrical)
“Less likely to remove trial gloves to answer phone, or when handling smaller items, screws, etc.”
Technical Portfolio Manager (facilities management)
“Our electricians say the gloves are an excellent fit. They did not need to cut the fingertips off, this is a huge positive as with other makes of gloves, the fingertips always get cut off.”
Electrical engineer
“This glove allows us to complete small complex wiring tasks while still having protected hands.”
Principal Technical Officer (Electrification & Plant)
Awards
It also gained BSIF Commended for ‘Product innovation Award 2024’
TALK TO US ABOUT HAND PROTECTION
Want to talk to the Stalsen team about your hand protection requirements?Call: +44 (0)1394 447090. Email: info@stalsen.com.Or complete the contact form below.
Proven Results
Read the STALSEN Case Studies for more information about how we work with our clients.
