RAYZA RX557
NBR Coated, Cut Level E, Thermal Glove
Why we developed this glove
Our work with customers indicated they wanted a glove for people working in cold, damp and frosty conditions who need a high level of warmth with minimum impact on dexterity… [Read more]
Anna – Marketing
GLOVE FEATURES
- High quality cut resistant liner with outstanding mechanical performance
- Fine thermal yarn woven into the liner provides comfort and warmth
- Very good dexterity
- Durable NBR water-repellent palm coating
- Suitable for work in dry or damp cold/frosty conditions
GLOVE SPECIFICATION
| Code: | RX557 |
| Size range: | 6/XS – 11/2XL |
| Coating: | NBR |
| Gauge | 13 |
| Liner: | Steel with fine thermal yarn |
| Packaging: | 10 pairs/pack – 50 pairs/carton |
| RRP: | £14.25 |
GLOVE STANDARDS
EN388:2016+A1:2018 - Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
4 = Abrasion
X = Blade Cut* (coup)
4 = Tear
3 = Puncture
E = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
EN511:2006 - Resistance to the cold
Specifies a glove’s performance in protection against the cold. This cold can be linked to weather conditions or to industrial activity.
X = Convective Cold (Performance Index 0-4)
2 = Contact cold (Performance Index 0-4)
X = Water penetration (1 = Pass/0 = Fail)
Notes: Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
GLOVE STORY
Who this glove was designed for
For people working in cold, damp and frosty conditions who need a high level of warmth with minimum impact on dexterity.
The solution
The Rayza RX557 is a lightweight thermal glove with no bulky fleece liner, it is designed for tasks that require dexterity in cold, damp or dry conditions.
It has an innovative fine thermal yarn that is woven into the liner, providing warmth and comfort.
It can be easily removed and put back on without the common problem of an inner fleece detaching.
Glove feedback
“The design of this glove is 10/10, no fleece liner to detach when you take your hands out, very warm and flexible.”
“We used these gloves for general tool handling and I have to say they are significantly warmer than the previous we tried..”
“Off Track operatives trialled these gloves for general tool handling etc. and found them much warmer to wear for the winter.”
Winter glove range
TALK TO US ABOUT HAND PROTECTION
Want to talk to the Stalsen team about your hand protection requirements?Call: +44 (0)1394 447090. Email: info@stalsen.com.Or complete the contact form below.
Proven Results
Read the STALSEN Case Studies for more information about how we work with our clients.
