RAYZA RX522
Lightweight, Cut Level E, Lower Arm Protection
Why we developed this glove
At the time of development, we identified that the standard arm protection widely available was not well designed. The sleeves slide down from the top and ride up from the bottom. These poorly fitting sleeves therefore feel uncomfortable and once they start to move they offer very little reliable protection… [Read more]
Jane – Sales
GLOVE FEATURES
- Advanced 18-gauge liner
- Ultra lightweight and highly breathable
- Exceptional levels of comfort, just like second skin
- A velcro top cuff to stop the sleeve from slipping down the arm
- Thin nylon thumb slot to prevent the sleeve from riding up the arm and exposing vital arteries
- Does not restrict dexterity and movement when used with a glove
GLOVE SPECIFICATION
| Code: | RX522 |
| Size range: | 450mm |
| Gauge: | 18 |
| Liner: | High Performance Polyethylene (HPPE) |
| Packaging: | 10 pairs/pack – 50 pairs/carton |
| RRP: | £25.18 |
GLOVE STANDARDS
EN388:2016+A1:2018 - Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:
2 = Abrasion
X = Blade Cut* (coup)
4 = Tear
X = Puncture
E = Straight Blade Cut (EN ISO 13997)
NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.
*Gloves should not be used when working with serrated blades
GLOVE STORY
Who this sleeve was designed for
Advanced arm protection for wearers that require an ultra-lightweight, securely fitted and comfortable lower arm protection, which has a high cut resistance.
Why we developed this sleeve
At the time of development, we identified that the standard arm protection widely available was not well designed. The sleeves slide down from the top and ride up from the bottom. These poorly fitting sleeves therefore feel uncomfortable and once they start to move they offer very little reliable protection.
The solution
The design of the Rayza RX522 was key to its success, but using a lighweight 18-guage liner we achieved excellent flexibility, this was also index E cut resistance. We added a thumb loop which stopped it riding up and a velcro strap at the top to avoid it slipping down.
Feedback on this sleeve
“The gauntlet that the operative was wearing at the time saved him from cutting his arm whilst working above the ceiling”
TALK TO US ABOUT HAND PROTECTION
Want to talk to the Stalsen team about your hand protection requirements?Call: +44 (0)1394 447090. Email: info@stalsen.com.Or complete the contact form below.
Proven Results
Read the STALSEN Case Studies for more information about how we work with our clients.
