+44 (0) 203 5000 723

info@stalsen.com

Magma MX253 Top grade cow split cut resistant welder’s gauntlet

Description

MAGMA MX253 welder’s gauntlets are designed with the welder in mind, offering not just protection, but superb fit, comfort and dexterity.

In line with Stalsen’s target of total wearer satisfaction, only the finest leathers are used, to create a gauntlet that every welder will want to wear. With Kevlar stitching to maximise longevity, these are gauntlets built to last.

Specification
Code: MX253
Brand

Magma

Available Sizes

10

Packaging

10 pairs/pack – 6 packs/case

Material

Top Grade Cow Split Leather

Thickness

1.0 – 1.2mm

Stitching

Heat Resistant Kevlar

Lining

Cotton Fleece at Palm

Qty :
  • Top grade cow grain leather.
  • Wide fit for ease of donning.
  • Increased length for extra protection.
  • Thumb and crotch reinforcement.
  • Excellent mechanical strength.
  • Fleece lined palm for comfort.
  • One piece back to eliminate seam breakdown.
  • Fully welted seams.
  • Heat resistant Kevlar stitching.

2X44C

 

EN388:2016 – Mechanical Hazards
Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the glove’s resistance to:

4 = Abrasion (Performance Index 1-4)
X = Blade Cut* (Performance Index 1-5)
4 = Tear (Performance Index 1-4)
4 = Puncture (Performance Index 1-4)
C = Cut (EN ISO 13997) (Rating A-F)

 

NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.

 

*Gloves should not be used when working with serrated blades.

42334X

 

EN407-Hot Thermal Hazards
This standard specifies thermal performance for protective gloves against heat and/or fire. The table below indicates the glove’s resistance to:

4= Flammability (Performance Index 1-4)
2 = Contact heat (Performance Index 1-4)
3 = Convective heat (Performance Index 1-4)
3 = Radiant heat (Performance Index 1-4)
4 = Small splashes of molten metal (Performance Index 1-4)
X = Large splashes of molten metal (Performance Index 1-4)

 

NOTES:
Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.

EN12477
Manual Metal Welding Hazards
Rating: Type A


More information

To request a sample of our products please click below. For more information about our products, or for details of how and where you can order, please contact Stalsen on: +44 (0) 203 5000 723 or complete our contact form




Loading...